

The SR210 radial-lift skid steer from Case Construction Equipment is a new Tier 4 Final model that features EZ EH controls and what the company calls best-in-class torque, breakout force and standard auxiliary hydraulic flow. The new machine increases its rated operating capacity to 2,100 pounds when compared to its predecessor, the SR200. The cooled exhaust gas recirculation (CEGR) engine design with particulate matter catalyst helps reduce maintenance and increase engine power by 10%. The SR210 also features one of the largest cabs and lowest entry thresholds in the industry, improving operator comfort.
- Unit weight of 6,970 pounds
- Standard (24.2 gallons per minute) and high-flow auxiliary (33.2 gallons per minute) hydraulics
- 74 gross horsepower
- Bucket breakout force of 7,270 pounds
- Torque of 232 foot pounds
- 19.5-gallon fuel tank
- Push-button Ride Control
- Two-speed ground drive
- Hydraulic one-way self-leveling
- Fully sealed and pressurized cab
EZ EH Controls
The EZ EH (electro-hydraulic) setup menu features nine preset speed and control settings that can be adjusted on the fly. A single rocker switch allows operators to switch between the Case “H” operating pattern and ISO pattern controls. New handles with additional “feel points” are designed to improve controllability and feathering.
Tier 4 Final
The skid steer features a CEGR engine with a particulate matter catalyst, which is made up of a diesel oxidation catalyst (DOC) and a high-efficiency flow-through filter. The DOC converts emissions into neutral gasses. The remaining particulate matter then passes through to the high-efficiency flow-through filter where it is stored and burned off through passive regeneration powered by the heat of the exhaust gas. These efficiencies are achieved while also improving engine power by 10%.
Telematics
The SR210 features a new electronic control module that logs operating data and has CAN-bus capabilities for diagnostic monitoring and telematics. This makes it compatible with Case’s SiteWatch telematics platform, which helps equipment owners track operating performance, maintenance intervals and demands, as well as equipment utilization and security.